Follow Us : Facebook | Instagram | YouTube

Bay Garage Systems
Licensed & Insured
MHIC License # 167012
Serving Harford County, Baltimore County, Cecil County, and nearby Maryland communities.

Garage Door Spring & Cable Replacement in Harford, Baltimore & Cecil Counties

Home › Services › Garage Door Springs & Cables

Services

It always seems to happen on a busy morning. You press the button on your way out, the opener hums, and the door barely moves. Or maybe you heard a loud bang from the garage the night before and didn’t think much of it until now.

When a garage door suddenly refuses to open, a broken spring or snapped cable is usually near the top of the list. Your car is stuck inside, and a door that worked fine yesterday now feels like it weighs a few hundred pounds. That’s because the springs were doing the heavy lifting all along. The opener only guides the door.

Bay Garage Systems replaces garage door springs and cables for homeowners throughout Harford, Baltimore, and Cecil Counties. Owner Jason Strozier has a decade of residential garage door experience, and the parts for nearly every spring and cable job are already on our truck when we pull up.

Bay Garage Systems

Spring and Cable Replacement at a Glance

Man wearing a black glove using a red cordless drill to fasten a screw into a wooden door frame.

Safety First

Please Don’t Try to Fix This One Yourself

Garage door springs hold a tremendous amount of tension. A torsion spring is wound tight enough to help lift the weight of your entire garage door, and if that tension is released the wrong way, the spring or tools can move suddenly with enough force to cause a serious injury. A cable under tension can also break or come loose suddenly with enough force to seriously hurt someone nearby.

Online videos can make spring replacement look like a weekend project. It isn’t. People do get hurt trying to adjust springs with the wrong tools or without knowing how much tension they’re dealing with. If a spring or cable is broken, the safest choice is to leave the door where it is and call a professional.

Please don’t keep running the opener either. With a broken spring, the opener motor is straining to lift a door it was never built to lift on its own. That can burn out the opener, bend the door panels, or pull the door off its track, and a one-hour repair turns into a much bigger one.

Bay Garage Systems

Signs a Spring or Cable Has Failed

Some breaks are hard to miss. Others creep up on you until the door stops working altogether. Homeowners usually notice one of these first.

If you notice any of these, stop using the door and give us a call. Please leave the door closed until we can look at it. Bent tracks, worn rollers, and other door problems are covered on our garage door repair page.

Bay Garage Systems

Torsion Springs vs. Extension Springs

Most garage doors use one of two spring systems, and knowing which one you have helps explain what we’ll be replacing. If you’re not sure which type is on your door, we’ll point it out when we arrive.

Torsion springs sit on a metal bar directly above the door. They twist to store energy and are the more common setup on newer homes. When one breaks, you can often see a clear gap in the coil.

Extension springs run along the horizontal tracks on each side of the door and stretch as the door closes. You’ll find them on many older homes and single-car garages. Each one should have a safety cable running through the middle, so a broken spring can’t fly across the garage.

We replace both types. For some doors, switching from extension springs to a torsion system is the better long-term choice, and we’ll talk it through with you if that’s the case. We made that switch on a recent Bel Air garage door project, building custom headers so the new torsion system had a solid place to mount.

Spacious, clean two-car garage with white sectional doors and a large window letting in light.

Bay Garage Systems

Why We Replace Both Springs

If your door has two springs and only one broke, you might wonder why we’d recommend replacing both. The two springs went in at the same time and have opened and closed the door the same number of times. When one wears out, the other usually isn’t far behind, and replacing just one often leads to a second service call down the road.

A new spring and an old spring also don’t pull evenly, which can leave the door off balance. Replacing them as a pair keeps the door lifting smoothly and saves you from paying for two visits. During an inspection, we may even recommend replacing springs before they break when we see heavy rust or coils that have started to stretch.

Bay Garage Systems

Standard or High-Cycle Springs

Every spring is rated for a certain number of cycles. One cycle is the door opening and closing once. A household that uses the garage as its main entrance can go through several cycles a day, and that wears down a standard spring faster than you’d expect.

We install both standard and high-cycle springs. High-cycle springs are built to handle more cycles before they wear out, which makes them a good fit for busy households, families with teenage drivers, or anyone who would rather not deal with springs again for a long time. We’ll ask how you use your garage and help you pick what makes sense.

Bay Garage Systems

We Weigh Every Door Before Choosing a Spring

A spring that’s too strong or too weak for the door can’t hold it in balance. The door may drift open on its own, drop too fast when closing, or make the opener work harder every time it runs. Picking a spring by the size of the door, or matching whatever spring was installed before, can repeat someone else’s mistake.

That’s why we weigh every door before we choose its springs. Doors often get heavier over the years when panels are replaced, insulation is added, or decorative hardware goes on. Weighing the door tells us what it needs today, not what it needed when the house was built.

Front view of a beige, two-story house with three attached garage doors and a brown shingled roof, set against a blue sky and trees behind.

Bay Garage Systems

Garage Door Cable Replacement

Cables work alongside the springs to raise and lower the door. They run from the bottom corners of the door up to drums at the top, and they carry the door’s weight every time it moves. Over time, cables fray, rust near the bottom brackets, or slip off the drum, especially after a spring breaks or the door comes off its track.

We replace frayed, rusted, and slipped cables, including cables that have completely unwound. When we replace a cable, we also check the drums and bottom brackets it connects to, since a worn part there can chew through a brand-new cable quickly.

Technician in red overalls and cap reaching to adjust a white sectional garage door.

Bay Garage Systems

What to Expect When We Arrive

Plan on about an hour for a spring replacement. We carry the springs and cables we need on the truck for nearly every job, so the work is usually finished in one visit.

Before we call the job done, we inspect the rest of the system, including the springs, cables, rollers, hinges, and tracks. We test the door by hand first to make sure it’s balanced and moves smoothly, then we test it again with the opener. If we find something else that needs attention, we’ll show you and explain your options before doing any additional work.

If the opener turns out to be part of the problem, we can talk with you about replacing your garage door opener. If the door itself is past the point of repair, we can talk you through a new garage door installation. You can see everything else we do on our garage door services page.

Our Spring Warranty

Standard springs installed by Bay Garage Systems come with a 3-year warranty, subject to the warranty terms, and we’ll explain the coverage on high-cycle springs if you choose them. If we recommend a related repair during your visit, such as a worn cable or roller, we’ll explain why, because a failing part somewhere else on the door can shorten a new spring’s life.

Serving Homeowners Across Harford, Baltimore & Cecil Counties

We replace springs and cables for homeowners in Harford County communities like Bel Air, Aberdeen, Fallston, and Joppa, along with homes throughout Baltimore and Cecil Counties. We’re based in Belcamp, so most Harford County homes are a short drive away. You can see our full service area here.

Bay Garage Systems isn’t a 24/7 emergency company. Still, we know a broken spring means a door you can’t use, so we fit spring calls in as quickly as our schedule allows during business hours (weekdays 8 to 5, Saturdays 8 to 3).

Front view of a two-car garage home with brick columns, white siding, and a red-tiled roof, a red-leaved tree on the left and a blue sky above.

TESTIMONIALS

What Our Customers Say

“Jason was amazing! We called around noon on Saturday after our torsion spring broke. He arrived by 4 the same day! We had him replace both of the springs and rollers and had us back up within 2 hours and his price was extremely fair! Highly recommend!”

    Chrissy D.

    Google Review

    “Jason expertly replaced the pulley cables and spring in my garage door system. The entire process was efficient and carried out with professionalism, resulting in my garage door functioning flawlessly once again. The cost was very reasonable for the quality of work. I would without hesitation call Jason again for any future repairs.”

      Duy Huynh

      Google Review

      FAQ’S

      Garage Door Spring & Cable FAQs

      How do I know if my garage door spring is broken?

      Look at the spring above the door. A torsion spring with a visible gap in its coil is broken. A loud bang from the garage, a door that only opens a few inches, and a door that suddenly feels too heavy to lift are other common signs.

      It isn’t safe to try. Without a working spring, the full weight of the door is pulling against you or the opener. If your car is stuck inside, call us and we’ll get to you as soon as we can.

      No. A broken or worn-out spring can’t be safely repaired, so we replace it. On doors with two springs, we replace both to keep the door balanced.

      How long do garage door springs last?

      That depends on the spring’s cycle rating and how often you use the door. High-cycle springs are built to last longer than standard springs, which is why we often suggest them for busy households.

      Age, rust, and friction wear cables down over time. A cable can also fail suddenly when a spring breaks or the door slips off its track, because the cable ends up carrying weight it wasn’t meant to carry alone.

      Get Started

      Schedule Spring or Cable Replacement

      If your door won’t open, hangs crooked, or you heard that loud bang, leave it closed and call Bay Garage Systems at (410) 807-8886. We’ll replace what’s broken, check the rest of the door, and make sure everything opens and closes smoothly before we head out.

      Reviewed and approved by Jason Strozier, the founder of Bay Garage Systems. He has worked hands-on with residential garage doors and their spring systems for 10 years. Maryland license: MHIC #167012. Fully insured, with background-checked installers. Jason personally oversees every project, even when he isn’t on site. You can read more about the company on our About Bay Garage Systems page. Homeowners can look up that license anytime through the Maryland Home Improvement Commission. Last reviewed: October 2026.